DETAILS VAN DE PRODUCTEN
Producten
Contacteer ons
|
How to Weld a Stainless Steel 45° Elbow: Installation Guide
| MOQ: | 100 kg |
| Prijs: | Onderhandelbaar |
| Standaardverpakking: | Standaard zeewaardige bundels, standaard multiplexkoffers |
| Leveringstermijn: | 15 dagen |
| Betalingswijze: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Leveringscapaciteit: | 2000 ton/per maand |
Detailinformatie
Plaats van herkomst
China
Merknaam
YUHAO
Certificering
ASTM, AISI, GB, DIN, JIS
Modelnummer
Butt Weld-buisfittingen
Wanddikte:
Sch5-SCH160
Standaard:
ASTM, AISI, GB, DIN, JIS
Oppervlakteafwerking:
Gepolijst, geborsteld, mat, gezandstraald
Materiaal:
304, 304l, 316, 316, 321, 347h, 310s, s31803, 2205, enz.
Type pijpfitting:
Concentrisch verloopstuk
Verbindingstype:
Stompgelast
Sollicitatie:
Olie, gas, chemie, petrochemie, energie, industriële leidingen, medische apparatuur, scheepsbouw
Diameterbereik:
DN15-DN900
Corrosiebestendigheid:
Hoge corrosiebestendigheid
Maat:
1/2" tot 110"
Pakket:
Houten kist of pallet of doos
Markeren:
stainless steel 45° elbow fitting
,buttweld pipe fittings installation
,welding stainless steel elbow guide
Productomschrijving
How to Weld a Stainless Steel 45° Elbow: Installation Guide
Proper installation is key to ensuring the longevity and integrity of your piping system. Incorrect welding can compromise the corrosion resistance of stainless steel. Follow these best practices for a successful installation.
Product Specifications
| Attribute | Value |
|---|---|
| Wall Thickness | Sch5-SCH160 |
| Standard | ASTM, AISI, GB, DIN, JIS |
| Surface Finish | Polished, Brushed, Matte, Sandblasted |
| Material | 304, 304l, 316, 316, 321, 347h, 310s, s31803, 2205, etc. |
| Pipe Fitting Type | Concentric reducer |
| Connection Type | Butt Welded |
| Application | Oil, Gas, Chemical, Petrochemical, Power, Industrial Piping, Medical Equipment, Shipbuilding |
| Diameter Range | DN15-DN900 |
| Brand Name | Yuhao |
| Corrosion Resistance | High Corrosion Resistance |
| Place of Origin | China |
| Size | 1/2" up to 110" |
| End | Bevel end ANSI B16.25 |
| Package | Wooden box or Pallet or carton |
Critical Steps for a Quality Weld
- Preparation: Bevel pipe ends to the correct angle (37.5°). Meticulously clean all surfaces with a dedicated stainless steel brush and solvent.
- Alignment & Tack Welding: Ensure perfect alignment and use tack welds to secure the fitting.
- Welding Process (TIG Recommended): Use the correct filler metal (ER308 for 304, ER316 for 316).
- Gas Purging (Essential): Use argon backing gas on the inside of the weld joint to prevent "sugaring" (oxidation), which destroys corrosion resistance.
- Heat Control: Use low heat input to minimize the heat-affected zone and prevent distortion.
- Post-Weld Treatment: Remove heat tint by pickling and passivation to restore the protective oxide layer.
Aanbevolen producten
